Controller

You can use this controller to cut down the power sent to your car. This will help protect your cars from high speed damage. And by reducing the power at each controller or driver station you will be able to mix experienced racers and others using rental cars.

And on the lower settings it will allow younger people to race who don't have advance racing skills. Many children will quickly lose interest if they keep running off the track, And staying on the track would be very welcome by the adults who have to put the cars back on the track. This will open the sport to schools , churches and scout groups and others.

This controller has three speed settings and a fine tune setting. It also has a hidden switch in the handle that will change it from a slow down controller to a normal turbo controller or back again. This offers complete control over the full range of power to the car.

The fine tune adjustment is used to customize the controller to your track. It will raise or lower the speed on all three settings listed above.

The bypass switch when is in the lower position it is in slowdown mode.
Up is for a normal turbo controller giving full power.
The switch is accessed through a small hole in the handle, this allows only you to change the setting.

This controller is designed for use on tracks with a voltage of 12 to 30 volt and cars that draw a maximum of 8 amps. It can be used on all H.O. and 16D to Group 20 and box stock.
It is not advised for peanut or other high performance motors.

This is a modification made to the Parma Turbo controller,
That is completely contained inside the controller handle.
It can be used on tracks from HO to 1/24th scale.

You can buy it complete with turbo controller. Resistor optional.

Or added to your, Parma Turbo controller.